Graffiti Shield Color Betong
Wax-based pigmented anti-graffiti coating
Fields of application
Graffiti Shield Colour is a pigmented water-based wax emulsion that
can be used as a combined anti-graffiti coating and coverage pro-
duct on trains, in underpasses and overpasses.
– Hides severe graffiti immediately until cleaning is possible
– Hides and restores overcleaned surfaces
– Low melting point
– Can be pigmented in the desired RAL or NCS colour standard
Start by cleaning the surface thoroughly to remove dirt. Allow the surface to dry properly.
The product must be stirred well before use! Apply the product using a roller or airless spray gun in 1-2 layers.
It is important that the first layer is allowed to dry before a second layer is applied. If the product runs, even it out with a paintbrush. The treated surface must have a minimum temperature of approx. 5°C. Drying time depends on the temperature.
After treatment, it is easier to remove graffiti or other undesired residues with a pressure washer (70-150 bar) and hot water (approx. 70°C).
Re-apply 1-2 layers of the coating to the cleaned surface.
Before you begin – Always evaluate the product on each surface to be treated, for suitability and results before overall application. It is important to include previous repairs and repairs in the test area. Different materials / surface compositions can result in absorption and / or appearance differences. Also test the application speed, pattern and technology needed to obtain a smooth surface.
The product is used in concentrated form. Consumption approx. 0.3 – 0.5 litre per m2.
305111 – 10L