Silane DC 6341 40%

Silane-based sealing agent for concrete

Silane DC 6341 40%

Fields of application

DC 6341 is a silane-based sealing agent for concrete.

Advantages

– Effective protection against water and salt damage
– Deep penetration capacity in concrete
– Permeable

Application instructions

Start by cleaning the surface thoroughly to remove dirt and any mould release residue and then allow the surface to dry for 1-5 days depending on the time of year. NB! New concrete must harden for at least 28 days before sealing with DC 6341 is carried out.
Shake the product well before use!
Apply the sealer using a low-pressure spray gun or roll it on with a roller in a primary layer – then apply a second layer wet on wet to maximise the depth of penetration. The treated surface must have a minimum temperature of approx. 5°C. After approx. 14 days, the anti-graffiti coating can be applied.

Before you begin – Always evaluate the product on each surface to be treated, for suitability and results before overall application. It is important to include previous repairs and repairs in the test area. Different materials / surface compositions can result in absorption and / or appearance differences. Also test the application speed, pattern and technology needed to obtain a smooth surface.

Dosage

The product is used in concentrated form.
Highly absorbent surfaces: 2-3 m2 per litre
Less absorbent surfaces: 4-5 m2 per litre

Packaging

3062025 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.