Stone wash

Highly effective but mild ready-to-use product for most surfaces

Stone wash

Fields of application

Stone Wash is used as an effective but mild ready-to-use product in order to dissolve general soiling, grease stains, oil stains, urine stains, moisture stains, algae and stains from leaves.
Stone Wash works well on surfaces such as concrete, plaster, brick, masonry, stone slabs, decking, fencing, terracotta, sandstone, slate and granite.


– Highly effective and fast-acting
– Mild and gentle against underlying material
– Fresh scent

Application instructions

Apply the product generously to the surface with a low-pressure spray gun.
Allow the product to work for 5 – 30 minutes depending on the degree of soiling and the outside temperature.
Use a brush to ensure that stains and soils are dissolved.
Then wash off the surface thoroughly using a hose, pressure washer orhot water pressure washer and adjust the pressure to the facade/ surface.

Apply the product to the test area according to the instructions for use. Allow the test area to dry thoroughly before checking results.

Avoid applying in temperatures > 30°C & < 5°C Store in temperatures between 5°C and 30°C. Do not expose product to frost. Dosage

The product is used in concentrated form. Consumption approx. 0.1 – 0.5 litre/m2.


402005 – 5L

The product image should be seen as an illustration. Some deviation from reality may occur.