GR Blue is used to remove graffiti from absorbent surfaces such as brick, granite, concrete, marble, terrazzo, slate, sandstone, limestone, tiles etc.

Advantages

• Effective on both spray doodles, felt-tip pens and tectyl
• Slight odor
• Thin liquid
• Easy to rinse off
• Economical in use

Application instructions

Apply the product with a paintbrush, brush, roller or paint sprayer. Allow the product to work for 10 – 2 hours depending on the nature of the graffiti. Use a brush or paintbrush on the surface to ensure that the paint is dissolved. Then wash off the surface thoroughly using a hot water pressure washer and adjust the pressure to the facade. In cases where a “shadow” remains, it can be necessary to use either GR Shadow or GR Kilroy.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.3 – 0.5 litre/m2.

Packaging

331025 – 25L
331700 – 1000L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Blue Flytande appeared first on Blue and Green.

A very effective graffiti and shadow remover to be used in cold weather and on difficult graffiti. Can be used on porous surfaces such as: granite, brick, concrete, lime, tiles, etc. The product dissolves spray graffiti, permanent markers and marker scribbles. For use on porous external surfaces.

Note! Do not use on metal surfaces such as aluminum. Do a test before removal.

Advantages

– Combination product
– Efficient

Application instructions

Apply with a brush. Agitate the surface well. Leave until the graffiti is dissolved, 10-30 minutes depending on the surface, graffiti and weather conditions. Rinse with hot water and high pressure, 90°C, 150 bar/2175 PSI or adapt to the surface. The spread of the lance nozzle should be 15 – 25 degrees and the water flow should be 15 to 20 liters/minute (4-5 gal/minute). For shadows, apply as a shadow remover, wait 5-10 minutes before rinsing with high pressure. Final rinse with low pressure.
Store frost-free in closed original packaging.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

Used concentrated.
Shake/stir before use

Consumption: 0.5 – 1.0 litres/m²

Packaging

026010 – 10L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Eden Gel appeared first on Blue and Green.

Ideal for removing residues from concrete and lime, as well as for removing flight rust and rust. It is also effective for cleaning and neutralizing oxidized surfaces on galvanized material. In the mining sector, it is used as a cleaner for vehicles. Its ability to deep-clean dirt-coated concrete floors, wall surfaces, and sheet facades makes it particularly useful in mining and paper production, without causing damage to aluminum, glass, rubber, painted surfaces, and similar materials.

Application instructions

The product is easily applied with a brush and should be left to act for between 15 and 90 minutes. Afterwards, the surface should be scrubbed with a brush followed by rinsing with a high-pressure washer. As long as the product is wet, it is in an active state and can be effectively used for up to 3 hours. One liter of the product covers an area of approximately 8 to 12 square meters. It is important that the temperature where the product is used exceeds +3°C for optimal results.
Gel Hammer has the ability to break down layers of concrete residue up to 6 mm thick.

Packaging

061025 – 25L
061200 – 200L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Gel Hammer appeared first on Blue and Green.

Designed for cleaning small spaces and rounded equipment, such as large bowls, this slim hand scraper is perfect for loosening stubborn dirt.
The polypropylene material reduces the risk of scratches on sensitive surfaces.

Packaging

T 40603 – STK

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Handskrapa 75mm appeared first on Blue and Green.

Used to remove graffiti from industrial painted surfaces such as trains, subways, trams, buses, metal facades, etc.
Works great even on absorbent materials where you have a sensitive painted surface to take into account when cleaning.

Advantages

– Effective on spray paint and marker graffiti.
– Gentle on underlying surfaces and materials
– Subtle scent
– Economical

Application instructions

Påfør produktet med en klut eller pensel og prøver å tørke vekk graffiti umiddelbart – etter tørking / skyll overflaten med vann.
Ved vanskeligere tagging / graffiti. la det virke i maksimalt 15 minutter og bearbeid overflaten med en klut eller børste for å sikre at fargen er oppløst.
Etter tørk / skyll overflaten grundig med vann slik at produktet slutter å virke på det underliggende materialet.

Forskrift: Påfør aldri på varme overflater og hindre uttørking. Vær forsiktig på overmalte og følsomme metall- og plastoverflater. Prøvevask anbefales.

Dosage

The product is used in concentrated form. Consumption approx. 0.1 – 0.3 litre/m2.

Packaging

336006 – 5L
336010 – 10L
336025 – 25L
336700 – 1000L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover 21 Flytande appeared first on Blue and Green.

Graffiti remover. Used to remove marker, ink, spray paint, etc. Mr. Perfect is used on all hard and soft colourfast and material-based surfaces such as floors, facades, tiles, metals, textiles, etc.

Advantages

• Low odor
• Aromatic free

Application instructions

Leave the product on for 1-30 seconds. Draw away or rinse away undissolved residual product. Always finish by rinsing with clean water. For tough stains, let the product work for 1-10 min, process the stain with a brush and finish with water. ATTENTION! Avoid Mr. Perfect on macrolon, ABS plastic, silk, suede and leather. Unsure if the surface is colorfast or material permanent, try first on a less visible place.
Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

Ready to use, do not dilute

Packaging

224003 – 1L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Mr Perfect appeared first on Blue and Green.

Orange terpenes are a natural and effective adhesive remover that can be used to remove glue from various surfaces. It contains a natural substance called d-Limonene, which is known for its ability to dissolve fat and adhesive.

Application instructions

To use orange terpenes as an adhesive remover, apply a small amount of oil to the adhesive area and gently rub with a cloth. Let the oil sit for a few minutes to dissolve the adhesive. Then, you can wipe away the oil and adhesive with a clean cloth.

It is important to note that orange terpenes can be strong and may damage certain surfaces, such as plastic. Before using orange terpenes, you should test it on a small hidden area to ensure that it does not cause any damage

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

It can be used pure or diluted with isopropanol as an orange cleaner.

Packaging

038025 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Orange Terpens appeared first on Blue and Green.

Used to remove old paint from most surfaces such as mortar, plaster, brick, concrete, tile, wood and metal. Solves both plastic paints and oil paints.

Advantages

– Highly effective on multi-layered old paint
– Subtle scent
– Gel that prevents rapid drying out
– Easy to wash off
– Economical

Application instructions

Always stir the product thoroughly before use.
Always test function on a small test surface (10 x 10 cm) first.
Apply the product in a thick layer with a brush, roller or paint sprayer. The layer on the product must be thicker than the paint layer to be removed. Let the product work in 30 minutes – 24 hours depending on the type and thickness of the paint and the outside temperature.
Do not allow the product to dry!
The product can be covered with construction plastic to give increased duration and effect. Check that the paint is completely dissolved by doing a scratch test and make sure that you can easily scrape down to the surface before removal can begin.
Dissolved paint is removed with a scraper, brush or hot water high pressure washer.
When washing start from below and work upwards – finish by rinsing the cleaned surface thoroughly with clean water from top to bottom. Repeat the treatment if necessary.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

0.5 – 1.0 litre/m2.

Packaging

328015 – 15L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Paint Remover Red appeared first on Blue and Green.

Is used to bleach and remove difficult graffiti shadows from absorbent stone surfaces, floor shadows inside buses and trains, wall shadows on laminate and fiberglass.
Used in softwash to clean facades, which is an effective method that reduces the risk of damage to surfaces compared to traditional high-pressure washing.
ATTENTION! The product must not be used on aluminium, galvanized surfaces, zinc or copper.

Advantages

– Effective – Opens up the material and bleaches the remaining shadow.

Application instructions

Shadow removal
Cover surfaces that are not to be cleaned.
Apply the product with a brush.
Let the product work for 30 minutes – 12 hours depending on the material and the nature of the shade.
Then rinse/rinse the surface thoroughly with lukewarm water.
ATTENTION! Check that the material can withstand the product.

Softwash
Avoid applying to windows or other sensitive surfaces.
If the solution comes into contact with such surfaces, rinse immediately with clean water.
Always test on an inconspicuous surface first.
Use a low-pressure washer or a regular garden hose to rinse away the solution.
Rinse thoroughly to ensure all solution and dirt is removed from the surface.
If stubborn dirt or stains remain, you can repeat the process or use a brush to thoroughly clean the area.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

Shadow removal: The product is used concentrated. Consumption approx. 0.1 – 0.3 litres/m2.

Softwash: Mixes with cold water in different proportions (5 – 30%), depending on the degree of dirt on the facade and duration of action.

Packaging

362020 – 20L
362200 – 200L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Soft Wash Hypo appeared first on Blue and Green.

Trouble Solver is used to remove paint, ink, spray painting, friction marks, tire marks, glue residue, tar etc.
Trouble Solver can be used on all hard and soft color-resistant surfaces, such as floors, glass, metals, etc.
Can also be used in printing business.
Trouble Solver should not be used on polykarbonat/Lexan/Makrolon, ABS plastic, silk and leather.

Advantages

• Aromatic free
• pH neutral
• Almost odorless

Application instructions

Trouble Solver is applied with a cloth, mop or a lowpressure
equipment. Allow Trouble Solver to work from 10 seconds to 30
minutes, depending on the nature of the substance, and the surface.
If necessary, process the surface with a brush or sponge.
Dry wipe and always rinse with clean water.
If there is any doubt as to whether the surface can withstand
the product, you should do a test in a less visible place.

Dosage

Use concentrated

Packaging

681005 – 5L
681025 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Trouble Solver appeared first on Blue and Green.