Water-based sealing agent for facades, roof and concrete floor
Fields of application
SC Oleo is a water-based sealing agent used for the sealing of porous facade surfaces, roofs and concrete floors where the sealing should resist and repel water, oil, grease, urine, algae, moss and chewing gum.
– Effective protection against water damage
– Oleo effect – resists both oil and grease
– Repels both human and animal urine
– Prevents frost damage
– UV resistant
– VOC free
– Extends interval between cleaning
– Estimated lifetime of approx. 10 years on vertical surfaces
Start by cleaning the surface thoroughly to remove dirt, algae, traffic film, wax and grease.
Allow the surface to dry so that it is dry or slightly damp but not wet. Make sure to cover windows and other surfaces that are not being treated. Shake the product well before use! Apply the sealer in a single layer using an airless or low-pressure spray gun or roll it on with a roller, going slowly from the top down. The treated surface must have a minimum temperature of approx. 5°C. Drying time depends on the temperature. After approx. 7 days, the product has fully hardened and the full effect is achieved.
Before you begin – Always evaluate the product on each surface to be treated, for suitability and results before overall application. It is important to include previous repairs and repairs in the test area. Different materials / surface compositions can result in absorption and / or appearance differences. Also test the application speed, pattern and technology needed to obtain a smooth surface.
The product is used in concentrated form.
Highly absorbent surfaces: 1 – 3 m2 per litre
Less absorbent surfaces: 4 – 10 m2 per litre
285005 – 5L
285025 – 25L
285700 – 1000L