Water based shine agent to restore gloss to plastic & rubber surfaces. Refresh plastic moldings and tires.

Advantages

• Concentrate
• Dilutable with water
• Gloss enhancing effect

Application instructions

Make sure the surface is clean and dry before applying.
Spray the product in a sponge and apply to the surface.
The product can also be sprayed directly onto the surface, eg tires.

Dosage

Dilutable with water 1:1

Packaging

454002 – 0,5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Shine Dressing RTU appeared first on Blue and Green.

Cleanon is a low-foaming floor product for polished floors. For
regular cleaning and maintenance of polished floors. An effective
product with great cleaning power, specially developed for cleaning
and maintenance of polished floors and stone flooring. Cleanon can
be used with high speed polishing – excellent polishing qualities.

Advantages

– pH approx. 7.8 in usable solution (1%).
– pH approx. 10 in concentrated form.

Application instructions

Use with all wet-cleaning methods e.g. damp mopping and in floor
washing machines.

The product must not be stored cold.

Dosage

25 to 100 ml per 10 litres water, depending on cleaning frequency
and degree of soiling.
Quick Fix: 1 % per litre water – scrub with machine and red pad.
High speed: 20 % per litre water – With high speed machine.

Packaging

GP-161723 – 5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Cleanon appeared first on Blue and Green.

Polly strengthens surfaces Highly durable Contains polyurethane.
Great alkali resistance. For safe treatment of floors in environments with heavy usage and where floors require a new protective top layer.
1 litre can cover 40 to 70 sq. m. Quick drying.
Can be polished at 1500 rpm. Can be removed with Goaway polish remover.

Advantages

– Polyurethane polish.
– Quick drying.

Application instructions

Ensure that floors are cleaned of old polish, polish residue and dirt etc. Spread Polly in a thin layer evenly distributed across the floor
surface. Allow the floor to dry between each treatment/layer.
The surface is dry enough to walk on after approx. 30 minutes. We recommend at least 2-3 thin layers.
For best results, always follow producer’s instructions for the respective flooring materials.

The product must not be stored cold.

Dosage

Spread in a thin layer. Ready to use.
For extra smooth surfaces: spread undiluted in 2-3 thin even layers.

Packaging

GP-161223 – 5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Polly appeared first on Blue and Green.

Protects and increases the gloss on the rim surface. The protective layer creates a dirt repellent surface.

Advantages

• Protection
• Gloss enhancing effect
• Hydrophobic effect

Application instructions

Make sure the surface is clean and dry before applying Ceramic Onecoat. Use the appropriate surface cleaning and equipment, see the manual. Add the product to the rim. Wait about 5-10 minutes, wipe the surface with a microfiber cloth.
If more gloss and depth are required, the product can be applied 1-5 times.

Dosage

The product is used concentrated, should not be diluted.

Packaging

4380001 – 100ML

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Ceramic Alloy Rim Coat appeared first on Blue and Green.

Protects and restores the color/gloss on plastic. The protective layer creates a dirt repellent surface.

Advantages

• Protection
• Gloss enhancing effect
• Hydrophobic effect

Application instructions

Make sure the surface is clean and dry before applying Ceramic Plastic Coat. Use the appropriate surface cleaning and equipment, see the manual. Add the product to the surface. If a dim surface is desired, wipe the surface with a microfiber cloth. If a glossy surface is desired, apply Ceramic Plastic Coat and allow the product to harden. If more shine is required, repeat the treatment 1-2 times after the product has hardened.

Dosage

The product is used concentrated, should not be diluted.

Packaging

4370001 – 100ML

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Ceramic Plastic Coat Pro appeared first on Blue and Green.

SC Perma is a 1K permanent graffiti protection product that can be used on concrete, brick, wood and metal.

Advantages

– UV resistant and heat resistant
– Open diffusion/breathability
– Low VOC content
– Excellent elastic properties, even at low temperatures
– High water repellent effect
– The product can be applied again on already treated surfaces
– Can be coloured in various shades
– Time-saving and economical to use.
– Clean graffiti with clean water and approx. 100 bar pressure
– No problems with stubborn “graffiti shadows”

Application instructions

• First clean the substrate/underlay carefully for dirt, algae, traffic grime, wax and any colour residue from old graffiti. Allow surface to dry completely.
• Shake or stir product well before use! Apply product with a paint sprayer, low pressure sprayer or roller with a short pile cover in a single layer.
• If the product runs, even out with a paintbrush. The treated surface should have a minimum temperature of approx. 5 °C. Drying time depends on temperature and layer thickness but is fully cured after approx. 24 hours.

NB! After application, the application to ols should be cleaned with Perma Cleaner to prevent the product hardening! Open packages should be used as a film can form after contact with air.

NB! The surface may appear a little darker and shinier after treatment always test a small area to check if the result matches aesthetic expectations.

Dosage

The product is most often used in concentrated form but can be thinned out if needed.
Absorbent surface: 2-4 m2 per litre
Less absorbent surface: 5-8 m2 per litre

Packaging

410009 – 10L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post SC Perma appeared first on Blue and Green.

Water based shine agent to restore gloss to plastic & rubber surfaces. Refresh plastic moldings and tires.

Advantages

• Concentrate
• Dilutable with water
• Gloss enhancing effect

Application instructions

Make sure the surface is clean and dry before applying.
Spray the product in a sponge and apply to the surface.
The product can also be sprayed directly onto the surface, eg tires.

Dosage

Dilutable with water 1:1

Packaging

399005 – 5L
399025 – 25L
399700 – 1000L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Shine Dressing appeared first on Blue and Green.

Blue & Green Glass Coating is a treatment for front windows on trains and buses etc.
The product has excellent chemical resistance properties and is easy to apply. High weather resistance along with E2C (easy to clean) properties reduces cleaning costs and washer fluid.

Advantages

• Protective coating, easy to apply
• Water repellent properties
• Insects, oil, grime and brake dust does not stick as easily
• The consumption of washer fluid will be reduced
• Improves visibility
• Sustainability 6–12 months, resistant to chemicals and washing.

Application instructions

The surface should be clean and free of grease and residue. In order to achieve a faultless adhesion a cleaning is required with an alkaline detergent together with a powdery hand sponge e.g.
Scotch Brite white. Rinse thoroughly with water.
If the application is made directly after washing it is usually enough to wipe the screen with a clean cloth / cloth with glass cleaner to remove any grease residues.
The best way to apply Glass Coating is with a lint-free cloth.
It is important to ensure that the material to be coated is not humid and the object temperature at least 5 °C, as the product is very sensitive to moisture during application.

Dosage

Use concentrated. 10–15 ml / m2

Packaging

275025 – 25L
3871054 – 0,5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Glass Coating appeared first on Blue and Green.

Effective water-based cleaner for stainless steel, chrome, laminated plastic and aluminum surfaces. Cleans, restores and protects the surface so that it better resists fingerprints and stains.

Advantages

– Effective
– Water based
– Protects surfaces fingerprints and stains

Application instructions

Spray the product directly on a clean cloth.
Wipe the surface until the desired result is obtained.
Let the product dry

Dosage

Ready to use.

Packaging

3871049 – 0,5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Stainless Steel Cleaner appeared first on Blue and Green.

Shine agent to restore the gloss of plastic & rubber surfaces. Refreshes plastic moldings and tire sides.

Advantages

• Concentrated product
• Gloss-enhancing effect

Application instructions

The surface must be properly cleaned and dry before application.
Spray the product in a sponge and apply on the surface. If you want more shine let the product dry for a few minutes and apply again as above. The product can also be sprayed directly on the surface, eg tire sides.

Dosage

Use concentrated. The product is ready to use

Packaging

329005 – 5L
329025 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Tyre Gloss appeared first on Blue and Green.