Rinse and drying agent for vehicle wash facilities for cars, buses, trucks, and trains. Used in automatic car washes and self-service (GDS) wash facilities. Provides a dry and water-repellent surface.

Application instructions

When used in automatic wash systems, dosing should follow the machine manufacturer’s recommendations.
Before application, the surface must be rinsed free of shampoo and degreasing agents.
Store above 5°C.

Dosage

From 0.5 to 1% or as needed.
Estimated consumption per passenger car: 1–5 cl.

Packaging

620025 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Eco Shine ’n Gloss appeared first on Blue and Green.

Cleaning agent with low pH for train carriages, locomotives, trams and metro trains. Train Wash Phosphor is a water-based cleaning agent which effectively loosens brake dust and dirt (iron oxide). Can also be used on transport containers.
This product is based on phosphoric acid.

Advantages

– Train Wash Phosphor is an acidic, water-based cleaning agent which effectively loosens brake dust.
– Train Wash Phosphor is concentrated and economical to use.

Application instructions

Apply after washing all types of vehicle. Self-polishing giving a Train Wash Phosphor has been specially designed for automatic train washing machines. The product dosage varies according to the type of machine and length of programme, from 5% to 30% depending on needs and type of wash. Dosage is customised around the cleaning techniques of the various machines. For manual washing, dosage is from 10% > according to object type, time needed to act >5 min. Work into the surface with a brush and rinse off with water.
Do not allow product to dry on the surface.

Dosage

Dosage 8 – 100% depending on circumstances.

Packaging

470200 – 200L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Train Wash Phosphor appeared first on Blue and Green.

Graffiti removal for use on the exteriors of trains, metros and trams.

Application instructions

Apply product with a brush or paintbrush. Apply the product in sections and do not apply so many m2 that the product is at risk of drying. Approx. 10 – 30 m2 is recommended depending on weather and temperature. Allow the product to work for 5 – 20 minutes depending on the nature of the graffiti. Use a brush or paintbrush on the surface to ensure that the paint is dissolved. White nylon scouring pads that do not scratch can be used to treat and remove any “paint drops” from spray paint graffiti. Then wash off the surface thoroughly using a soft brush and running water or a hot water pressure washer and low pressure. For thick layers of graffiti, it can be necessary to repeat the treatment and for large amounts of Tectyl graffiti, it can be necessary to use GR Tectyl M.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.3 – 0.5 litre/m2.

Packaging

380010 – 10L
380700 – 1000L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Train F appeared first on Blue and Green.

Eco-labeled product for removing graffiti from exterior surfaces of trains, metro, and trams

Application instructions

Apply the product using a brush.
Work in sections and avoid covering too many m² at once to prevent the product from drying out. Approximately 10–30 m² is recommended, depending on weather and temperature.
Allow the product to act for 5–20 minutes depending on the nature of the graffiti. Work the surface with a brush to ensure the paint dissolves.
White scrub pads that do not scratch can be used to work on and remove any “paint drips” from spray graffiti.
Then rinse the surface thoroughly using a soft brush with water flow or a low-pressure hot water pressure washer.
In cases of thick graffiti layers, it may be necessary to repeat the treatment. For graffiti involving heavy-duty undercoating (tectyl), the use of GR Tectyl M may be required.

Guidelines
Never apply on hot surfaces and prevent the product from drying.
Exercise caution on repainted or sensitive metal and plastic surfaces.
Test washing is recommended.

Dosage

Use the product undiluted. Consumption: approx. 0.3–0.5 liters/m².
Be environmentally conscious: do not use more than necessary.

Packaging

777010 – 10L
777025 – 25L
777700 – 1000L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Eco Graffiti Remover Train appeared first on Blue and Green.

Used to remove graffiti from industrial painted surfaces such as trains, subways, trams, buses, metal facades, etc.
Works great even on absorbent materials where you have a sensitive painted surface to take into account when cleaning.

Advantages

– Effective on spray paint and marker graffiti.
– Gentle on underlying surfaces and materials
– Subtle scent
– Economical

Application instructions

Påfør produktet med en klut eller pensel og prøver å tørke vekk graffiti umiddelbart – etter tørking / skyll overflaten med vann.
Ved vanskeligere tagging / graffiti. la det virke i maksimalt 15 minutter og bearbeid overflaten med en klut eller børste for å sikre at fargen er oppløst.
Etter tørk / skyll overflaten grundig med vann slik at produktet slutter å virke på det underliggende materialet.

Forskrift: Påfør aldri på varme overflater og hindre uttørking. Vær forsiktig på overmalte og følsomme metall- og plastoverflater. Prøvevask anbefales.

Dosage

The product is used in concentrated form. Consumption approx. 0.1 – 0.3 litre/m2.

Packaging

336006 – 5L
336010 – 10L
336025 – 25L
336700 – 1000L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover 21 Flytande appeared first on Blue and Green.

Environmentally certified. Water-dilutable, high foaming degreaser for surfaces on cars, trucks, trains, metro, tram, bus, truck, tarpaulin

Advantages

High foaming
Highly concentrated
Easy to rinse off

Application instructions

• DO NOT apply the product on hot surfaces.
• The product should NOT dry in. (If at risk, apply more product before rinsing off.)
• Use cautiously on newly painted, sensitive metal, and plastic surfaces.
• Test washing is recommended.
• Apply the product with a brush, sponge, cloth, or low-pressure spray.
• Let the product work for 1-10 minutes depending on the degree of soiling and outer temperature.
• Use a brush or sponge if necessary.
• Be careful with painted, lacquered, and aluminum surfaces.

Dosage

The product is highly concentrated and should be mixed with water – depending on the degree of soiling and outer temperature.
Car 1:20 – 1:100
Truck 1:10 – 1:50
Construction machinery 1:5 – 1:20

Packaging

047025 – 25L
047200 – 200L
047700 – 1000L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Eco Wash Power appeared first on Blue and Green.

Water-dilutable bio-based eco-labelled petroleum-free micro-degreasing for surfaces on cars, trucks, trains, metros, trams, buses.

Advantages

• Gentle
• Low odor
• Nordic environmental label The Swan

Application instructions

• Apply the product with the designated low-pressure sprayer.
• Let the product work for 1-10 minutes depending on the degree of soiling and the outside temperature
• Use a brush or sponge if necessary.
• Rinse all surfaces thoroughly with water

• DO NOT apply the product to hot surfaces.
• The agent should NOT dry in. (If at risk, apply more product before rinsing
• Test wash is recommended.

Dosage

The product is concentrated and should be mixed with water – depending on the degree of soiling and outside temperature.

Passenger car 1:2-1:6
Truck 1:2-1:4

Packaging

032025 – 25L
032200 – 200L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Eco Micro Veg appeared first on Blue and Green.

High-tech coating for linoleum, plastic and rubber floors. The product has excellent chemical resistance properties with high scratch and wear resistance, but also with permanent elasticity. Repeated treatment is possible at any time without stripping. With new technology, ink and graffiti can be easily removed repeatedly, without affecting the surface properties. The product is available with different gloss: high, medium and low gloss.

Advantages

• Restores finishes on worn floors and makes the surface very easy to clean.
• The substrate acquires anti-graffiti properties.
• Provides a protective coating with high gloss.
• Easy to apply to the substrate.
• Only one layer is needed.
• The product provides long-term protection.
• Easy to repair in case of damage.

Application instructions

It is important that the surface is completely clean and free of grease and contaminants. Thoroughly clean the floor and remove stains and old polish. Rinse the surface thoroughly with clean water and allow the surface to dry completely before applying Floor Coating. Linoleum floors may require a long drying time. Check if necessary. with moisture meter that the floor is completely dry. Floor Coating is applied with a microfiber applicator. Apply a thin layer of about 5 μm (micrometers).

NOTE! It is very important to make sure that the material to be coated is not wet or damp. The object temperature must be at least + 10 ° C when the product is applied.

Care: We recommend that you clean a treated floor with a pH-neutral detergent. It prolongs the life of the coating. Normal shelf life is 12-24 months, depending on load and wear. Coverage: 80-100 m2 / L.

Drying times: Dust dry: approx. 20 minutes (+20 C)
Surface dry: approx. 4 hours (+20 C)
Final cured approx. 7 days (+20 C)

Dosage

Used concentrated. NOTE! The product must not be exposed to frost.

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Floor & Wall Coating High Gloss appeared first on Blue and Green.

Used as regular shampoo, giving a water repellent effect for up to 4 weeks. Premium Shampoo. The product also works great as a brush cleaner in automated brush washing facilities.

Advantages

Medium foam
Keeps the brushes clean
Gives a glossy surface

Application instructions

Apply to vehicle using a sponge. Allow to work for 3-5 minutes, avoid drying out on paintwork and windows. Rinse clean with water. Avoid washing in direct/strong sunlight.

Dosage

Hand Shampoo: Dilute with water to a 2-5% solution.
Brush Cleaner: 0.5% solution or adjust as needed. 4-8cl/car.
Heavy vehicles: 1cl / m vehicles.

Packaging

506005 – 5L
506025 – 25L
506200 – 200L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Eco Ultra Shine appeared first on Blue and Green.

Interior Coating is a high-tech transparent 1-component graffiti protection for plastic, colored fiberglass and laminate surfaces. The product has excellent chemical resistance properties with high scratch and abrasion resistance.
Interior Coating is a very effective protection which makes it the natural choice to protect e.g. interior surfaces on trains, metro, trams and buses. Marker, spray and ink paint can be easily and repeatedly removed without affecting the surface.

Advantages

• Permanent graffiti protection
• Protective coating with gloss, easy to apply
• Only 1 layer needs to be applied
• Long durability
• Not flammable

Application instructions

• It is important that the underlying surface is completely clean and free of grease and contaminants.
• Clean the surface thoroughly and remove stains and grease.
• Rinse the surface thoroughly with clean water and let the surface dry completely before applying Interior Coating.
• Interior Coating is preferably applied with a microfiber applicator. Apply a layer of approximately 5 μm (micrometers).

NOTE! It is very important to ensure that the material to be coated is not wet or damp. The object temperature must be at least +5 °C when the product is applied. The product is very sensitive to moisture and film formation can be affected by moisture and low temperatures. Application is carried out according to separate product instructions. Coverage: 125-150 m2 / L.
Drying times: Dust dry: approx. 20 minutes (+20 C), Surface dry: approx. 2 hours (+20 C), Final cured approx. 12 hours (+20 C)

Dosage

Used concentrated. ATTENTION! The product must not be exposed to frost.

Packaging

3871053 – 0,5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Interior Coating appeared first on Blue and Green.