Paint Remover Green

Fields of application

Paint Remover Green is used to remove old paint from mineral surfaces such as mortar, plaster, brick and concrete as well as wood surfaces. Especially suitable for plastic paint, acrylic and latex paint.

Advantages

– Highly effective on multi-layered old paint
– Subtle scent
– Gel that prevents rapid drying out
– Dyed which makes it easy to see the application surface
– Unites with the underlying paint and “lifts” it off
– Easy to wash off
– Economical

Application instructions

Always stir the product well before use.
Always test the product on a small area (10 x 10 cm) first.
Apply the product in a thick layer with a brush, roller or paint sprayer. The layer of the product must be thicker than the paint layer that is being removed. Allow the product to work for 30 minutes – 24 hours depending on the type and thickness of the paint and the outside temperature.
Do not allow the product to dry! The product can be covered with plastic sheeting to increase the working time and effect.
Check that the paint is completely dissolved by carrying out a test to ensure that the paint can easily be scraped off down to the underlying surface before beginning the removal.
Dissolved paint is removed with a scraper, brush or hot water pressure washer. When washing, begin from the bottom and work upwards. Finish by rinsing off the cleaned wall thoroughly with clean water from the top down.
Repeat the treatment if necessary.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

Consumption approx. 0.5 – 1.0 litre/m2

Packaging

308020 – 20L

The product image should be seen as an illustration. Some deviation from reality may occur.