Rinse and drying agent for vehicle wash facilities for cars, buses, trucks, and trains. Used in automatic car washes and self-service (GDS) wash facilities. Provides a dry and water-repellent surface.

Application instructions

When used in automatic wash systems, dosing should follow the machine manufacturer’s recommendations.
Before application, the surface must be rinsed free of shampoo and degreasing agents.
Store above 5°C.

Dosage

From 0.5 to 1% or as needed.
Estimated consumption per passenger car: 1–5 cl.

Packaging

620025 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Eco Shine ’n Gloss appeared first on Blue and Green.

Shine Pro can be used on vehicles after degreasing. This leaves a smooth and dirt-repellent surface.

Advantages

– Shine Pro is self-polishing and gives a glossy shine.
– Shine Pro makes the next wash easier.

Application instructions

Apply after washing all types of vehicle. Self-polishing giving a quick shine to paintwork, To be used in the final stage of automated carwash.

Dosage

Manual wash: 1:50 to 1:100 To be used in automated vehicle washes where the dosage of Shine Pro is adjusted to the machine recommendations. From 0.5 to 3% or acc. to type of carwash and need.

Packaging

407025 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.
\n\n

The post Shine Pro appeared first on Blue and Green.

Cleaning agent with low pH for train carriages, locomotives, trams and metro trains. Train Wash Phosphor is a water-based cleaning agent which effectively loosens brake dust and dirt (iron oxide). Can also be used on transport containers.
This product is based on phosphoric acid.

Advantages

– Train Wash Phosphor is an acidic, water-based cleaning agent which effectively loosens brake dust.
– Train Wash Phosphor is concentrated and economical to use.

Application instructions

Apply after washing all types of vehicle. Self-polishing giving a Train Wash Phosphor has been specially designed for automatic train washing machines. The product dosage varies according to the type of machine and length of programme, from 5% to 30% depending on needs and type of wash. Dosage is customised around the cleaning techniques of the various machines. For manual washing, dosage is from 10% > according to object type, time needed to act >5 min. Work into the surface with a brush and rinse off with water.
Do not allow product to dry on the surface.

Dosage

Dosage 8 – 100% depending on circumstances.

Packaging

470200 – 200L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Train Wash Phosphor appeared first on Blue and Green.

Aromatic-free cold degreaser with low VOC content and mild inherent odor. Dissolves oil, tar, asphalt, road salt, etc.

Advantages

Mild inherent odor

Aromatic-free

Nordic Swan Ecolabelled

Application instructions

Works on both dry and wet surfaces. Apply with low pressure from the bottom up. Let the product work, but do not allow it to dry. (If it starts to dry, spray more before rinsing off.) Rinse with high pressure. Rinse one section at a time. Do not apply to hot surfaces.

Dosage

Do not dilute

Packaging

776025 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Eco Degreaser Extra appeared first on Blue and Green.

Graffiti removal for use on the exteriors of trains, metros and trams.

Application instructions

Apply product with a brush or paintbrush. Apply the product in sections and do not apply so many m2 that the product is at risk of drying. Approx. 10 – 30 m2 is recommended depending on weather and temperature. Allow the product to work for 5 – 20 minutes depending on the nature of the graffiti. Use a brush or paintbrush on the surface to ensure that the paint is dissolved. White nylon scouring pads that do not scratch can be used to treat and remove any “paint drops” from spray paint graffiti. Then wash off the surface thoroughly using a soft brush and running water or a hot water pressure washer and low pressure. For thick layers of graffiti, it can be necessary to repeat the treatment and for large amounts of Tectyl graffiti, it can be necessary to use GR Tectyl M.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.3 – 0.5 litre/m2.

Packaging

380010 – 10L
380700 – 1000L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Train F appeared first on Blue and Green.

Eco-labeled product for removing graffiti from exterior surfaces of trains, metro, and trams

Application instructions

Apply the product using a brush.
Work in sections and avoid covering too many m² at once to prevent the product from drying out. Approximately 10–30 m² is recommended, depending on weather and temperature.
Allow the product to act for 5–20 minutes depending on the nature of the graffiti. Work the surface with a brush to ensure the paint dissolves.
White scrub pads that do not scratch can be used to work on and remove any “paint drips” from spray graffiti.
Then rinse the surface thoroughly using a soft brush with water flow or a low-pressure hot water pressure washer.
In cases of thick graffiti layers, it may be necessary to repeat the treatment. For graffiti involving heavy-duty undercoating (tectyl), the use of GR Tectyl M may be required.

Guidelines
Never apply on hot surfaces and prevent the product from drying.
Exercise caution on repainted or sensitive metal and plastic surfaces.
Test washing is recommended.

Dosage

Use the product undiluted. Consumption: approx. 0.3–0.5 liters/m².
Be environmentally conscious: do not use more than necessary.

Packaging

777010 – 10L
777025 – 25L
777700 – 1000L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Eco Graffiti Remover Train appeared first on Blue and Green.

Water based shine agent to restore gloss to plastic & rubber surfaces. Refresh plastic moldings and tires.

Advantages

• Concentrate
• Dilutable with water
• Gloss enhancing effect

Application instructions

Make sure the surface is clean and dry before applying.
Spray the product in a sponge and apply to the surface.
The product can also be sprayed directly onto the surface, eg tires.

Dosage

Dilutable with water 1:1

Packaging

454002 – 0,5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Shine Dressing RTU appeared first on Blue and Green.

For professional paint treatment. Ergonomically designed to minimize the risk of strain injuries for the user.

Packaging

T 492152 – STK

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Polermaskin ShineMate EP802 appeared first on Blue and Green.

A washing sponge with a waffle-patterned cleaning surface

Packaging

T BL50GV20015ER – STK

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Svamp Grå Våfflad appeared first on Blue and Green.

Yellow washing sponge without shampoo

Packaging

T 5862 – STK

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Tvättsvamp Gul 190x110x50mm, 30-pack appeared first on Blue and Green.