WC 1703 Creme

Silane-based concrete sealer cream

WC 1703 Creme

Fields of application

WC 1703 Cream is a waterborne silane-based concrete sealer.


– Effective protection against water and salt damage
– Deep penetration capacity in concrete
– Permeable
– Minimal material waste
– Certified in accordance with the Swedish Transport
– Administration’s AMA structure 13
– CE Marked 0921-BPR-2015

Application instructions

Start by cleaning the surface thoroughly to remove dirt and any mould release residue and then allow the surface to dry for 1-5 days depending on the time of year. NB! New concrete must harden for aminimum of 28 days before sealing with WC 1703 Cream is carried out. Stir the product prior to use! Apply the sealer using an airless spray gun or roll it on using a roller so that a thick whitish layer is visible but is then absorbed into the cement and becomes transparent. The treated surface must have a minimum temperature of approx. 2°C

Before you begin – Always evaluate the product on each surface to be treated, for suitability and results before overall application. It is important to include previous repairs and repairs in the test area. Different materials / surface compositions can result in absorption and / or appearance differences. Also test the application speed, pattern and technology needed to obtain a smooth surface.


The product is used in concentrated form.
Highly absorbent surfaces: 2 – 3 m2 per litre
Less absorbent surfaces: 3 – 4 m2 per litre


303027 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.