Naturacoat SC 20 Clear

Polysaccharide-based anti-graffiti coating for hard surfaces

Naturacoat SC 20 Clear

Fields of application

SC 20 is a patented environmentally friendly polysaccharide-based anti-graffiti coating that can be used on most types of hard non-absorbent surfaces such as alumini-um ports, fencing, steel containers, plastic containers etc.


– Protects against spray paint, paintbrush and marker graffiti
– Prevents occurrence of hard to clean “graffiti shadows”
– Low melting point
– Permeable
– Estimated lifetime of approx. 36 months, depending on the surface and external influences.

Application instructions

Start by cleaning the surface thoroughly to remove dirt, algae, traffic film and any paint remnants from old graffiti. Allow the surface to dry completely.
When applying anti-graffiti coating to newly painted surfaces, allow the paint to dry for approx. 1 – 4 weeks before application takes place.
Shake the product well before use! Apply the product using an airless spray gun or roll it on with a roller. If the product runs, even it out with a paintbrush.
The coating should be applied in 2 layers and the first layer must be dry before the next layer is applied (usually 30 minutes – 1 hour).
The treated surface must have a minimum temperature of approx. 5°C. Drying time is 1-3 hours depending on the temperature.
After treatment, it is easier to remove graffiti or other undesired residues with a pressure washer (60-90 bar) and hot water (approx. 65°C). Adjust pressure to the facade. 2 new layers of the product are then applied to the cleaned surface, which is subsequently protected against graffiti again. NB! The surface may appear darker and glossier after treatment.

Before you begin – Always evaluate the product on each surface to be treated, for suitability and results before overall application. It is important to include previous repairs and repairs in the test area. Different materials / surface compositions can result in absorption and / or appearance differences. Also test the application speed, pattern and technology needed to obtain a smooth surface.


The product is used in concentrated form. Consumption approx. 0.2 – 0.3 litre/m2


306115 – 15L

The product image should be seen as an illustration. Some deviation from reality may occur.