Graff Shield Color Plåt

Fields of application

Graffiti Shield Color is a pigmented water-based wax emulsion that can be used as a combined anti-graffiti coating and coverage product on trains (metal), in underpasses and overpasses.

Advantages

– Permeable
– Hides severe graffiti immediately until cleaning is possible
– Hides and restores overcleaned surfaces
– Low melting point
– Can be pigmented in the desired RAL or NCS colour standard

Application instructions

Start by cleaning the surface thoroughly to remove dirt. Allow the surface to dry properly. The product must be stirred well before use! Apply the product using a roller or airless spray gun in 1-2 layers. It is important that the first layer is allowed to dry before a second layer is applied. If the product runs, even it out with a paintbrush. The treated surface must have a minimum temperature of approx. 5°C. Drying time depends on the temperature. After treatment, it is easier to remove graffiti or other undesired residues with a pressure washer (70-150 bar) and hot water (approx. 70°C).
Re-apply 1-2 layers of the coating to the cleaned surface.

Dosage

The product is used in concentrated form. Consumption approx. 0.3 – 0.5 litre per m2.

Packaging

305110 – 10L

The product image should be seen as an illustration. Some deviation from reality may occur.