Used to remove old paint from most surfaces such as mortar, plaster, brick, concrete, tile, wood and metal. Solves both plastic paints and oil paints.

Advantages

– Highly effective on multi-layered old paint
– Subtle scent
– Gel that prevents rapid drying out
– Easy to wash off
– Economical

Application instructions

Always stir the product thoroughly before use.
Always test function on a small test surface (10 x 10 cm) first.
Apply the product in a thick layer with a brush, roller or paint sprayer. The layer on the product must be thicker than the paint layer to be removed. Let the product work in 30 minutes – 24 hours depending on the type and thickness of the paint and the outside temperature.
Do not allow the product to dry!
The product can be covered with construction plastic to give increased duration and effect. Check that the paint is completely dissolved by doing a scratch test and make sure that you can easily scrape down to the surface before removal can begin.
Dissolved paint is removed with a scraper, brush or hot water high pressure washer.
When washing start from below and work upwards – finish by rinsing the cleaned surface thoroughly with clean water from top to bottom. Repeat the treatment if necessary.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

0.5 – 1.0 litre/m2.

Packaging

328015 – 15L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Paint Remover Red appeared first on Blue and Green.

Water based shine agent to refresh tires, plastic moldings etc.

Advantages

• Dilutable with water
• Odorless
• Leaves a glossy surface
• Thickened for better effect

Application instructions

Use concentrated. Spray either in a sponge or directly on the tire. Wipe the surface dry to give a smooth shine. Wipe off excess and eventual spots on the car paint etc. Always use sponge for application on plastic moldings etc.

Dosage

Use concentrated

Packaging

462005 – 5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Plastic & Rubber Gloss appeared first on Blue and Green.

Bug Clean is an effective insect remover that effectively removes dried insect residue on glass, varnish, chrome and plastic without damage surface. Excellent for use when you wash your car. Effective cleaning agent. Insect Remover for Cars, caravans, etc

Advantages

• Fast acting.
• Can be safely used on glass, chrome and plastic.
• Easy to use

Application instructions

Do not apply the product to hot or sunlit surfaces. Apply Bug Clean
directly on the surface. Wait 3-5 minutes so that the dirt membranes
dissolve. Note, do not allow the product to dry on the surface. If
necessary, scrub carefully with a microfiber cloth or sponge.
Rinse the surface with water and continue washing the car as usual

Dosage

Ready to use

Packaging

430002 – 0,5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Bug Clean appeared first on Blue and Green.

Masonry Prewash is used as a pre-washing product to dissolve extremely heavy coal, carbon and sulphate coatings on absorbent stone surfaces such as brick, masonry, unpolished marble, terracotta, sandstone, slate and granite. NB! The product should not be used on aluminium, wood, metal or painted surfaces.

Advantages

– Highly effective and long-lasting
– Gel
– Does not corrode glass

Application instructions

Cover surfaces that are not to be cleaned.
Pre-moisten the surface being treated with water.
Apply the product with a brush, roller or paint sprayer intended for high-alkaline products.
Allow the product to work for 30 minutes – 2 hours depending on the degree of soiling and the outside temperature.
Use a brush to ensure that stains and soils are dissolved.
Then wash off the surface thoroughly from the bottom up using a hot water pressure washer and adjust the pressure to the facade/ surface. After rinsing off, apply the product Restoration Cleaner as soon as possible (see the product sheet and follow instructions).

Dosage

The product is used in concentrated form. Consumption approx. 0.3 – 1.0 litre/m2.

Packaging

416005 – 5L
416025 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Masonry Prewash appeared first on Blue and Green.

Wheel Wash Plus is an alkaline cleaner for rims. Cleans the rims and
gives a glossy and shiny surface. Removes oil, ingrown dirt, brake dust,
etc. The product is thickened, which means that it remains and
works better on the surface

Advantages

• Concentrated
• Fast-working formula
• Powerful high alkaline cleaner
• Dissolves dust from brakes, road dirt and oi

Application instructions

Apply with a low pressure sprayer, let it work for a while.
Rinse with a high-pressure syringe. Do not let the product dry
on the surface. Use equipment which is adapted to alkaline
Cleaners.
Do not use on sensible surfaces, such as Magnesium-, Chrome or unvarnished alumina rims. Do not use on hot surfaces. The product is not allowed to freeze

Dosage

Diluted with water 1+1 – 1+3 (25-50%). Adjust the concentration to the surface to be washed

Packaging

389005 – 5L
389025 – 25L
389200 – 200L
389700 – 1000L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Wheel Wash Plus appeared first on Blue and Green.

Ink Remover Shadow Gel is used to remove hard to clean marker and aniline from laminate, hard painted surfaces, galvanised lockers etc.

Advantages

– Effective and fast-acting on marker and aniline
– Removes ”shadows”
– Saves time on cleaning
– Thixotropic to avoid running
– Economical

Application instructions

Apply the product with a cloth and try to wipe off graffiti immediately using small circular motions – then wipe off/wash the surface carefully with water or glass cleaner.
For more severe graffiti, allow the product to work for 2-3 minutes and then wipe the surface with a cloth to ensure that the paint is dissolved – then wipe off/wash the surface carefully with water or glass cleaner so that the product does not affect the underlying material.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.2 – 0.3 litre/m2.

Packaging

3831004 – 1L
3831006 – 5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Ink Remover Shadow Gel appeared first on Blue and Green.

GR Train N is used to remove graffiti on the exteriors of trains, metros and trams.

Advantages

– Effective on spray paint and marker graffiti – Gentle on underlying surfaces and materials – Subtle scent – Economical

Application instructions

Apply product with a brush or paintbrush. Apply the product in sections and do not apply so many m2 that the product is at risk of drying on the surface. Approx. 10-30 m2 is recommended depending on weather and temperature. Allow the product to work for 5 – 20 minutes depending on the nature of the graffiti. Use a brush or paintbrush on the surface to ensure that the paint is dissolved. White nylon scouring pads that do not scratch can be used to treat and remove any “paint drops” from spray paint graffiti. Then wash off the surface thoroughly using a soft brush and running water or a hot water pressure washer and low pressure. For thick layers of graffiti, it can be necessary to repeat the treatment and for large amounts of Tectyl graffiti, it can be necessary to use Graffiti Remover Tectyl M.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.3 – 0.5 litre/m2.
Stir/shake before use.

Packaging

383005 – 5L
383010 – 10L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Train N appeared first on Blue and Green.

GR Shadow is used to remove severe graffiti shadows from absorbent surfaces such as brick, concrete, granite, treated marble, limestone and tiles. Also works well on laminate fibreglass.
NB! The product should not be used on aluminium.

Advantages

– Effective and economical
– Opens up the material and removes the remaining shadow
– Thixotropic to better stick to the surface

Application instructions

Apply the product with a paintbrush, brush or cloth.
Allow the product to work for 5 – 30 minutes depending on the material and the nature of the shadow.
Then wash off the surface thoroughly using a hot water pressure washer and adjust the pressure to the facade.
Repeat the treatment if necessary.
After treatment on laminate, fibreglass and metal surfaces with a cloth/scouring pad, it is recommended that the surface be dried off with a damp cloth or glass cleaner.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.2 – 0.5 litre/m2.

Packaging

355005 – 5L
355025 – 25L
355600 – 600L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Shadow appeared first on Blue and Green.

GR 21 is used to remove graffiti on surfaces with industrial paint such as trains, metros, trams, busses, sheet metal facades etc.
Also works well on absorbent material.

Advantages

– Effective on spray paint and marker graffiti.
– Gentle on underlying surfaces and materials
– Subtle scent
– Gel
– Economical

Application instructions

Apply the product with a paintbrush, brush, roller or paint sprayer. Allow the product to work for 3 – 10 minutes depending on the nature of the graffiti.
Use a brush or paintbrush on the surface to ensure that the paint is dissolved.
Then wash off the surface thoroughly using a hot water pressure washer and low pressure.
For thick layers of graffiti, it can be necessary to repeat the treatment.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.3 – 0.5 litre/m2.
Stir/shake before use.

Packaging

336005 – 5L
336011 – 10L
336026 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover 21 Gel appeared first on Blue and Green.

Tixotropt klottersaneringsmedel som används för att avlägsna klotter exteriört på tåg, metro och spårvagnar.

Egenskaper

• Effektiv på sprayklotter och tuschklotter
• Skonsam mot underliggande yta och material
• Svag doft
• Ekonomisk att använda

Bruksanvisning

Applicera produkten med borste eller pensel. Applicera i sektioner och lägg inte för många m2 så produkten riskerar att torka in. Ca 10 – 30 m2 rekommenderas beroende på väder och temperatur. Låt produkten verka i 5 – 20 minuter beroende på klottrets beskaffenhet.
Bearbeta ytan med en borste eller pensel för att säkerställa att färgen är upplöst. Vit skurnylon som inte repar kan användas för att bearbeta och avlägsna eventuella ”färgdroppar ” från sprayklotter. Spola därefter av ytan noggrant med en mjuk borste med vatten genomlöp eller hetvattenhögtryckstvätt och lågt tryck.Vid tjocka lager med klotter kan det vara nödvändigt att upprepa behandlingen och vid mycket tectylklotter kan det vara nödvändigt att använda Graffiti Remover Tectyl M.

Föreskrift: Applicera aldrig på varm yta och förhindra intorkning.
Iaktag försiktighet på omlackerat och känsliga metall- och plastytor.
Provtvättning rekommenderas

Dosering

Produkten används koncentrerad.
Åtgång ca 0,3 – 0,5 liter/m2.
Omröres/omskakas före användning.

Förpackningar

332010 – 10L
332600 – 600L

Produktbilden ska ses som illustration. Viss avvikelse från verkligheten kan förekomma.

The post Graffiti Remover Blue N appeared first on Blue and Green.