For professional paint treatment. Ergonomically designed to minimize the risk of strain injuries for the user.

Packaging

T 492152 – STK

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Polermaskin ShineMate EP802 appeared first on Blue and Green.

Oscillating polishing machine with 15 mm stroke length. Gentle on the paint as the temperature does not rise high. Sensitive parts of the paint can therefore be polished without the risk of overheating or burning.

Packaging

T 492140 – STK

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Polermaskin Shinemate EX610-5/15 15mm appeared first on Blue and Green.

An oscillating polishing machine with a 21 mm stroke length. Exceptionally gentle on the paint as the temperature does not rise high.
Therefore, sensitive parts of the paint can be polished without the risk of overheating or burning.

Packaging

T 492130 – STK

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Polermaskin Shinemate EX610-21 21mm appeared first on Blue and Green.

A very effective graffiti and shadow remover to be used in cold weather and on difficult graffiti. Can be used on porous surfaces such as: granite, brick, concrete, lime, tiles, etc. The product dissolves spray graffiti, permanent markers and marker scribbles. For use on porous external surfaces.

Note! Do not use on metal surfaces such as aluminum. Do a test before removal.

Advantages

– Combination product
– Efficient

Application instructions

Apply with a brush. Agitate the surface well. Leave until the graffiti is dissolved, 10-30 minutes depending on the surface, graffiti and weather conditions. Rinse with hot water and high pressure, 90°C, 150 bar/2175 PSI or adapt to the surface. The spread of the lance nozzle should be 15 – 25 degrees and the water flow should be 15 to 20 liters/minute (4-5 gal/minute). For shadows, apply as a shadow remover, wait 5-10 minutes before rinsing with high pressure. Final rinse with low pressure.
Store frost-free in closed original packaging.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

Used concentrated.
Shake/stir before use

Consumption: 0.5 – 1.0 litres/m²

Packaging

026010 – 10L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Eden Gel appeared first on Blue and Green.

The machine is well-balanced, lightweight, quiet, and has a low vibration level.
Uses a high-performance 18V Li-ion battery pack.
Equipped with a brushless direct current motor (BLDC) with integrated motor management for high polishing performance.

Application instructions

Maximum polishing disc diameter is 150 mm.
Has a stroke of 15 mm.
Speed range: 2000 – 5000 revolutions per minute.
Power: 18V DC.
Weight: 2.1 kg.
Thread: M8.
Vibration level: 3.761 m/s².
Noise level: 78.5 dB.

Packaging

T 492105 – STK

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Polermaskin ShineMate DA Sladdlös EB351-5_15 appeared first on Blue and Green.

Ink Remover Shadow Gel is used to remove hard to clean marker and aniline from laminate, hard painted surfaces, galvanised lockers etc.

Advantages

– Effective and fast-acting on marker and aniline
– Removes ”shadows”
– Saves time on cleaning
– Thixotropic to avoid running
– Economical

Application instructions

Apply the product with a cloth and try to wipe off graffiti immediately using small circular motions – then wipe off/wash the surface carefully with water or glass cleaner.
For more severe graffiti, allow the product to work for 2-3 minutes and then wipe the surface with a cloth to ensure that the paint is dissolved – then wipe off/wash the surface carefully with water or glass cleaner so that the product does not affect the underlying material.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.2 – 0.3 litre/m2.

Packaging

3831004 – 1L
3831006 – 5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Ink Remover Shadow Gel appeared first on Blue and Green.

Ink Remover Shadow is used to remove hard to clean marker and aniline from laminate, hard painted surfaces, galvanised lockers etc.

Advantages

– Effective and fast-acting on marker and aniline
– Removes ”shadows”
– Saves time on cleaning

Application instructions

Apply the product with a cloth and try to wipe off graffiti immediately using small circular motions – then wipe off/wash the surface carefully with water or glass cleaner.
For more severe graffiti, allow the product to work for 2-3 minutes and then wipe the surface with a cloth to ensure that the paint is dissolved – then wipe off/wash the surface carefully with water or glass cleaner so that the product does not affect the underlying material.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.1 – 0.3 litre/m2.
Stir/shake before use.

Packaging

3831005 – 5L
3831025 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Ink Remover Shadow appeared first on Blue and Green.

GR Shadow is used to remove severe graffiti shadows from absorbent surfaces such as brick, concrete, granite, treated marble, limestone and tiles. Also works well on laminate fibreglass.
NB! The product should not be used on aluminium.

Advantages

– Effective and economical
– Opens up the material and removes the remaining shadow
– Thixotropic to better stick to the surface

Application instructions

Apply the product with a paintbrush, brush or cloth.
Allow the product to work for 5 – 30 minutes depending on the material and the nature of the shadow.
Then wash off the surface thoroughly using a hot water pressure washer and adjust the pressure to the facade.
Repeat the treatment if necessary.
After treatment on laminate, fibreglass and metal surfaces with a cloth/scouring pad, it is recommended that the surface be dried off with a damp cloth or glass cleaner.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.2 – 0.5 litre/m2.

Packaging

355005 – 5L
355025 – 25L
355600 – 600L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Shadow appeared first on Blue and Green.

GR Dracula is used to quickly remove graffiti, Tectyl and lighter “shadows” from absorbent surfaces such as brick, granite, con-crete, marble, terrazzo, slate, sandstone, limestone, tiles etc.

Advantages

– Effective and fast-acting on graffiti from spray paint, Tectyl, marker and “lighter” shadows
– Saves time on cleaning

Application instructions

Apply the product with a brush or paintbrush.
Allow the product to work for 10 – 30 minutes depending on the nature of the graffiti.
Use a brush or paintbrush on the surface to ensure that the paint is dissolved.
Then wash off the surface thoroughly using a hot water pressure washer and adjust the pressure to the facade.
In cases where a “shadow” remains, it can be necessary to use either GR Shadow or GR Kilroy.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.1 – 0.3 litre/m2.

Packaging

333005 – 5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Dracula appeared first on Blue and Green.

GR Kilroy is used to remove severe shadows from spray paint graffiti and Tectyl from absorbent stone surfaces such as concrete, brick and granite.
The product is also used to remove burnt/corroded graffiti that normal graffiti removers are not capable of.
NB! The product should not be used on metals/surfaces that are
not resistant to acids.

Advantages

– Effective and fast-acting
– Dissolves severe shadows from graffiti and Tectyl
– Breaks the surface of burnt/corroded graffiti
– Saves time on cleaning

Application instructions

Apply the product with a brush or paintbrush.
Allow the product to work for 1 – 5 minutes depending on the material and the nature of the shadow.
Then wash off the surface thoroughly using a hot water pressure washer and adjust the pressure to the facade.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.1 – 0.3 litre/m2.

Packaging

313010 – 10L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Kilroy appeared first on Blue and Green.