Graffiti removal for use on the exteriors of trains, metros and trams.

Application instructions

Apply product with a brush or paintbrush. Apply the product in sections and do not apply so many m2 that the product is at risk of drying. Approx. 10 – 30 m2 is recommended depending on weather and temperature. Allow the product to work for 5 – 20 minutes depending on the nature of the graffiti. Use a brush or paintbrush on the surface to ensure that the paint is dissolved. White nylon scouring pads that do not scratch can be used to treat and remove any “paint drops” from spray paint graffiti. Then wash off the surface thoroughly using a soft brush and running water or a hot water pressure washer and low pressure. For thick layers of graffiti, it can be necessary to repeat the treatment and for large amounts of Tectyl graffiti, it can be necessary to use GR Tectyl M.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.3 – 0.5 litre/m2.

Packaging

380010 – 10L
380700 – 1000L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Train F appeared first on Blue and Green.

Eco-labeled product for removing graffiti from exterior surfaces of trains, metro, and trams

Application instructions

Apply the product using a brush.
Work in sections and avoid covering too many m² at once to prevent the product from drying out. Approximately 10–30 m² is recommended, depending on weather and temperature.
Allow the product to act for 5–20 minutes depending on the nature of the graffiti. Work the surface with a brush to ensure the paint dissolves.
White scrub pads that do not scratch can be used to work on and remove any “paint drips” from spray graffiti.
Then rinse the surface thoroughly using a soft brush with water flow or a low-pressure hot water pressure washer.
In cases of thick graffiti layers, it may be necessary to repeat the treatment. For graffiti involving heavy-duty undercoating (tectyl), the use of GR Tectyl M may be required.

Guidelines
Never apply on hot surfaces and prevent the product from drying.
Exercise caution on repainted or sensitive metal and plastic surfaces.
Test washing is recommended.

Dosage

Use the product undiluted. Consumption: approx. 0.3–0.5 liters/m².
Be environmentally conscious: do not use more than necessary.

Packaging

777010 – 10L
777025 – 25L
777700 – 1000L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Eco Graffiti Remover Train appeared first on Blue and Green.

Designed for cleaning small spaces and rounded equipment, such as large bowls, this slim hand scraper is perfect for loosening stubborn dirt.
The polypropylene material reduces the risk of scratches on sensitive surfaces.

Packaging

T 40603 – STK

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Handskrapa 75mm appeared first on Blue and Green.

Is used to bleach and remove difficult graffiti shadows from absorbent stone surfaces, floor shadows inside buses and trains, wall shadows on laminate and fiberglass.
Used in softwash to clean facades, which is an effective method that reduces the risk of damage to surfaces compared to traditional high-pressure washing.
ATTENTION! The product must not be used on aluminium, galvanized surfaces, zinc or copper.

Advantages

– Effective – Opens up the material and bleaches the remaining shadow.

Application instructions

Shadow removal
Cover surfaces that are not to be cleaned.
Apply the product with a brush.
Let the product work for 30 minutes – 12 hours depending on the material and the nature of the shade.
Then rinse/rinse the surface thoroughly with lukewarm water.
ATTENTION! Check that the material can withstand the product.

Softwash
Avoid applying to windows or other sensitive surfaces.
If the solution comes into contact with such surfaces, rinse immediately with clean water.
Always test on an inconspicuous surface first.
Use a low-pressure washer or a regular garden hose to rinse away the solution.
Rinse thoroughly to ensure all solution and dirt is removed from the surface.
If stubborn dirt or stains remain, you can repeat the process or use a brush to thoroughly clean the area.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

Shadow removal: The product is used concentrated. Consumption approx. 0.1 – 0.3 litres/m2.

Softwash: Mixes with cold water in different proportions (5 – 30%), depending on the degree of dirt on the facade and duration of action.

Packaging

362020 – 20L
362200 – 200L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Soft Wash Hypo appeared first on Blue and Green.

Graffiti Remover is used to remove graffiti on hard, colourfast surfaces such as laminate, glass, metal, tiles etc.

Advantages

– Effective against marker graffiti, silver/gold pens and ink pens – Also removes lighter “shadows” left by marker graffiti – Gentle on underlying surfaces and materials – Subtle scent – Fast-acting

Application instructions

Spray the product on a clean cloth or directly on the graffitied surface and wipe away the graffiti.
Then wipe off the surface with a damp cloth or glass cleaner.
For more severe graffiti, allow the product to work for 1-5 minutes and then wipe off the surface with a cloth or white scouring pad – then wipe off/wash the surface carefully with damp cloth or glass cleaner so that the product does not affect the underlying material.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 50-100 ml/m2.

Packaging

253005 – 5L
3871046 – 0,5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover appeared first on Blue and Green.

GR Wipes are used to remove graffiti from hard, colourfast surfaces such as laminate, glass, metal, tiles etc.

Advantages

– Effective against marker graffiti, silver/gold pens and ink pens
– Also removes lighter “shadows” left by marker graffiti
– Gentle on underlying surfaces and materials
– Subtle scent
– Fast-acting and does not run

Application instructions

Pull a paper wipe out of the container and wipe away graffiti.Then wipe the surface with a damp cloth or glass cleaner.
For more severe graffiti, allow the product to work for 1-5 minutes and apply the paper wipe to the surface. Then wipe off/wash the surface carefully with a damp cloth or glass cleaner so that the product does not affect the underlying material.
NB! Check that the material can tolerate the product. Not for use on plexiglass! Close the package properly in order to prevent the product from drying out.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 1 paper wipe/m2.

Packaging

384056 – STK

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Wipes appeared first on Blue and Green.

Ink Remover Shadow Gel is used to remove hard to clean marker and aniline from laminate, hard painted surfaces, galvanised lockers etc.

Advantages

– Effective and fast-acting on marker and aniline
– Removes ”shadows”
– Saves time on cleaning
– Thixotropic to avoid running
– Economical

Application instructions

Apply the product with a cloth and try to wipe off graffiti immediately using small circular motions – then wipe off/wash the surface carefully with water or glass cleaner.
For more severe graffiti, allow the product to work for 2-3 minutes and then wipe the surface with a cloth to ensure that the paint is dissolved – then wipe off/wash the surface carefully with water or glass cleaner so that the product does not affect the underlying material.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.2 – 0.3 litre/m2.

Packaging

3831004 – 1L
3831006 – 5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Ink Remover Shadow Gel appeared first on Blue and Green.

GR Train N is used to remove graffiti on the exteriors of trains, metros and trams.

Advantages

– Effective on spray paint and marker graffiti – Gentle on underlying surfaces and materials – Subtle scent – Economical

Application instructions

Apply product with a brush or paintbrush. Apply the product in sections and do not apply so many m2 that the product is at risk of drying on the surface. Approx. 10-30 m2 is recommended depending on weather and temperature. Allow the product to work for 5 – 20 minutes depending on the nature of the graffiti. Use a brush or paintbrush on the surface to ensure that the paint is dissolved. White nylon scouring pads that do not scratch can be used to treat and remove any “paint drops” from spray paint graffiti. Then wash off the surface thoroughly using a soft brush and running water or a hot water pressure washer and low pressure. For thick layers of graffiti, it can be necessary to repeat the treatment and for large amounts of Tectyl graffiti, it can be necessary to use Graffiti Remover Tectyl M.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.3 – 0.5 litre/m2.
Stir/shake before use.

Packaging

383005 – 5L
383010 – 10L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Train N appeared first on Blue and Green.

GR Tectyl is used to remove Tectyl spray graffiti from both hard, smooth surfaces and absorbent surfaces.

Advantages

– Effective and fast-acting
– Also dissolves silver/gold spray paint graffiti
– VOC free
– Subtle scent

Application instructions

Apply the product with a paintbrush, brush or low-pressure spray gun. Allow the product to work for 5 – 30 minutes depending on the material and the nature of the graffiti.
Use a brush or paintbrush on the surface to ensure that the Tectyl is dissolved.
Then wash off the surface thoroughly using a hot water pressure washer and adjust the pressure to the facade.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.1 – 0.3 litre/m2.

Packaging

339010 – 10L
339200 – 200L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Tectyl M appeared first on Blue and Green.

Tixotropt klottersaneringsmedel som används för att avlägsna klotter exteriört på tåg, metro och spårvagnar.

Egenskaper

• Effektiv på sprayklotter och tuschklotter
• Skonsam mot underliggande yta och material
• Svag doft
• Ekonomisk att använda

Bruksanvisning

Applicera produkten med borste eller pensel. Applicera i sektioner och lägg inte för många m2 så produkten riskerar att torka in. Ca 10 – 30 m2 rekommenderas beroende på väder och temperatur. Låt produkten verka i 5 – 20 minuter beroende på klottrets beskaffenhet.
Bearbeta ytan med en borste eller pensel för att säkerställa att färgen är upplöst. Vit skurnylon som inte repar kan användas för att bearbeta och avlägsna eventuella ”färgdroppar ” från sprayklotter. Spola därefter av ytan noggrant med en mjuk borste med vatten genomlöp eller hetvattenhögtryckstvätt och lågt tryck.Vid tjocka lager med klotter kan det vara nödvändigt att upprepa behandlingen och vid mycket tectylklotter kan det vara nödvändigt att använda Graffiti Remover Tectyl M.

Föreskrift: Applicera aldrig på varm yta och förhindra intorkning.
Iaktag försiktighet på omlackerat och känsliga metall- och plastytor.
Provtvättning rekommenderas

Dosering

Produkten används koncentrerad.
Åtgång ca 0,3 – 0,5 liter/m2.
Omröres/omskakas före användning.

Förpackningar

332010 – 10L
332600 – 600L

Produktbilden ska ses som illustration. Viss avvikelse från verkligheten kan förekomma.

The post Graffiti Remover Blue N appeared first on Blue and Green.