A very effective graffiti and shadow remover to be used in cold weather and on difficult graffiti. Can be used on porous surfaces such as: granite, brick, concrete, lime, tiles, etc. The product dissolves spray graffiti, permanent markers and marker scribbles. For use on porous external surfaces.

Note! Do not use on metal surfaces such as aluminum. Do a test before removal.

Advantages

– Combination product
– Efficient

Application instructions

Apply with a brush. Agitate the surface well. Leave until the graffiti is dissolved, 10-30 minutes depending on the surface, graffiti and weather conditions. Rinse with hot water and high pressure, 90°C, 150 bar/2175 PSI or adapt to the surface. The spread of the lance nozzle should be 15 – 25 degrees and the water flow should be 15 to 20 liters/minute (4-5 gal/minute). For shadows, apply as a shadow remover, wait 5-10 minutes before rinsing with high pressure. Final rinse with low pressure.
Store frost-free in closed original packaging.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

Used concentrated.
Shake/stir before use

Consumption: 0.5 – 1.0 litres/m²

Packaging

026010 – 10L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Eden Gel appeared first on Blue and Green.

Designed for cleaning small spaces and rounded equipment, such as large bowls, this slim hand scraper is perfect for loosening stubborn dirt.
The polypropylene material reduces the risk of scratches on sensitive surfaces.

Packaging

T 40603 – STK

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Handskrapa 75mm appeared first on Blue and Green.

Orange terpenes are a natural and effective adhesive remover that can be used to remove glue from various surfaces. It contains a natural substance called d-Limonene, which is known for its ability to dissolve fat and adhesive.

Application instructions

To use orange terpenes as an adhesive remover, apply a small amount of oil to the adhesive area and gently rub with a cloth. Let the oil sit for a few minutes to dissolve the adhesive. Then, you can wipe away the oil and adhesive with a clean cloth.

It is important to note that orange terpenes can be strong and may damage certain surfaces, such as plastic. Before using orange terpenes, you should test it on a small hidden area to ensure that it does not cause any damage

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

It can be used pure or diluted with isopropanol as an orange cleaner.

Packaging

038025 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Orange Terpens appeared first on Blue and Green.

Is used to bleach and remove difficult graffiti shadows from absorbent stone surfaces, floor shadows inside buses and trains, wall shadows on laminate and fiberglass.
Used in softwash to clean facades, which is an effective method that reduces the risk of damage to surfaces compared to traditional high-pressure washing.
ATTENTION! The product must not be used on aluminium, galvanized surfaces, zinc or copper.

Advantages

– Effective – Opens up the material and bleaches the remaining shadow.

Application instructions

Shadow removal
Cover surfaces that are not to be cleaned.
Apply the product with a brush.
Let the product work for 30 minutes – 12 hours depending on the material and the nature of the shade.
Then rinse/rinse the surface thoroughly with lukewarm water.
ATTENTION! Check that the material can withstand the product.

Softwash
Avoid applying to windows or other sensitive surfaces.
If the solution comes into contact with such surfaces, rinse immediately with clean water.
Always test on an inconspicuous surface first.
Use a low-pressure washer or a regular garden hose to rinse away the solution.
Rinse thoroughly to ensure all solution and dirt is removed from the surface.
If stubborn dirt or stains remain, you can repeat the process or use a brush to thoroughly clean the area.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

Shadow removal: The product is used concentrated. Consumption approx. 0.1 – 0.3 litres/m2.

Softwash: Mixes with cold water in different proportions (5 – 30%), depending on the degree of dirt on the facade and duration of action.

Packaging

362020 – 20L
362200 – 200L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Soft Wash Hypo appeared first on Blue and Green.

SC Perma is a 1K permanent graffiti protection product that can be used on concrete, brick, wood and metal.

Advantages

– UV resistant and heat resistant
– Open diffusion/breathability
– Low VOC content
– Excellent elastic properties, even at low temperatures
– High water repellent effect
– The product can be applied again on already treated surfaces
– Can be coloured in various shades
– Time-saving and economical to use.
– Clean graffiti with clean water and approx. 100 bar pressure
– No problems with stubborn “graffiti shadows”

Application instructions

• First clean the substrate/underlay carefully for dirt, algae, traffic grime, wax and any colour residue from old graffiti. Allow surface to dry completely.
• Shake or stir product well before use! Apply product with a paint sprayer, low pressure sprayer or roller with a short pile cover in a single layer.
• If the product runs, even out with a paintbrush. The treated surface should have a minimum temperature of approx. 5 °C. Drying time depends on temperature and layer thickness but is fully cured after approx. 24 hours.

NB! After application, the application to ols should be cleaned with Perma Cleaner to prevent the product hardening! Open packages should be used as a film can form after contact with air.

NB! The surface may appear a little darker and shinier after treatment always test a small area to check if the result matches aesthetic expectations.

Dosage

The product is most often used in concentrated form but can be thinned out if needed.
Absorbent surface: 2-4 m2 per litre
Less absorbent surface: 5-8 m2 per litre

Packaging

410009 – 10L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post SC Perma appeared first on Blue and Green.

Ink Remover Shadow Gel is used to remove hard to clean marker and aniline from laminate, hard painted surfaces, galvanised lockers etc.

Advantages

– Effective and fast-acting on marker and aniline
– Removes ”shadows”
– Saves time on cleaning
– Thixotropic to avoid running
– Economical

Application instructions

Apply the product with a cloth and try to wipe off graffiti immediately using small circular motions – then wipe off/wash the surface carefully with water or glass cleaner.
For more severe graffiti, allow the product to work for 2-3 minutes and then wipe the surface with a cloth to ensure that the paint is dissolved – then wipe off/wash the surface carefully with water or glass cleaner so that the product does not affect the underlying material.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.2 – 0.3 litre/m2.

Packaging

3831004 – 1L
3831006 – 5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Ink Remover Shadow Gel appeared first on Blue and Green.

Ink Remover Shadow is used to remove hard to clean marker and aniline from laminate, hard painted surfaces, galvanised lockers etc.

Advantages

– Effective and fast-acting on marker and aniline
– Removes ”shadows”
– Saves time on cleaning

Application instructions

Apply the product with a cloth and try to wipe off graffiti immediately using small circular motions – then wipe off/wash the surface carefully with water or glass cleaner.
For more severe graffiti, allow the product to work for 2-3 minutes and then wipe the surface with a cloth to ensure that the paint is dissolved – then wipe off/wash the surface carefully with water or glass cleaner so that the product does not affect the underlying material.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.1 – 0.3 litre/m2.
Stir/shake before use.

Packaging

3831005 – 5L
3831025 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Ink Remover Shadow appeared first on Blue and Green.

GR Shadow is used to remove severe graffiti shadows from absorbent surfaces such as brick, concrete, granite, treated marble, limestone and tiles. Also works well on laminate fibreglass.
NB! The product should not be used on aluminium.

Advantages

– Effective and economical
– Opens up the material and removes the remaining shadow
– Thixotropic to better stick to the surface

Application instructions

Apply the product with a paintbrush, brush or cloth.
Allow the product to work for 5 – 30 minutes depending on the material and the nature of the shadow.
Then wash off the surface thoroughly using a hot water pressure washer and adjust the pressure to the facade.
Repeat the treatment if necessary.
After treatment on laminate, fibreglass and metal surfaces with a cloth/scouring pad, it is recommended that the surface be dried off with a damp cloth or glass cleaner.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.2 – 0.5 litre/m2.

Packaging

355005 – 5L
355025 – 25L
355600 – 600L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Shadow appeared first on Blue and Green.

GR Dracula is used to quickly remove graffiti, Tectyl and lighter “shadows” from absorbent surfaces such as brick, granite, con-crete, marble, terrazzo, slate, sandstone, limestone, tiles etc.

Advantages

– Effective and fast-acting on graffiti from spray paint, Tectyl, marker and “lighter” shadows
– Saves time on cleaning

Application instructions

Apply the product with a brush or paintbrush.
Allow the product to work for 10 – 30 minutes depending on the nature of the graffiti.
Use a brush or paintbrush on the surface to ensure that the paint is dissolved.
Then wash off the surface thoroughly using a hot water pressure washer and adjust the pressure to the facade.
In cases where a “shadow” remains, it can be necessary to use either GR Shadow or GR Kilroy.

Note: Never apply on hot surfaces and prevent drying.
Use caution on repainted and sensitive metal and plastic surfaces.
Sample washing is recommended.

Dosage

The product is used in concentrated form. Consumption approx. 0.1 – 0.3 litre/m2.

Packaging

333005 – 5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Graffiti Remover Dracula appeared first on Blue and Green.

SC 20 is a patented environmentally adapted polysaccharide-based anti-graffiti coating that can be used on most types of absorbent surfaces, including brick, concrete, granite, sandstone, limestone, plaster etc.

Advantages

– Protects against spray paint, paintbrush and marker graffiti
– Prevents occurrence of hard to clean “graffiti shadows”
– Low melting point
– Permeable
– Estimated lifetime of approx. 36 months, depending on the surface and external influences.
– Recommended for historical monuments and listed building facades as the pro-duct has fantastic aesthetic advantages – completely invisible but provides the surface with the necessary protection.

Application instructions

Start by cleaning the surface thoroughly to remove dirt, algae, traffic film, wax, and any paint remnants from old graffiti.
Allow the surface to dry so that it is dry or slightly damp but not wet. NB! New concrete must harden for a minimum of 28 days before e the anti-graffiti coating is applied.
When applying anti-graffiti coating to newly painted surfaces, allow the paint to dry for approx. 2 – 4 weeks before application takes place. Shake the product well before use! Apply the product using an airless spray gun or roll it on with a roller. If the product runs, even it out with a paintbrush.
The coating should be applied in 2-3 layers and the first layer must be dry before the next layer is applied (usually 30 minutes – 1 hour).
The treated surface must have a minimum temperature of approx. 5°C. Drying time is 1-3 hours depending on the temperature.
After treatment, it is easier to remove graffiti or other undesired residues with a pressure washer (60-90 bar) and hot water (approx. 65°C). Adjust pressure to the surface/facade.
2-3 new layers of the product are then applied to the cleaned surface, which is subsequently protected against graffiti again.

Before you begin – Always evaluate the product on each surface to be treated, for suitability and results before overall application. It is important to include previous repairs and repairs in the test area. Different materials / surface compositions can result in absorption and / or appearance differences. Also test the application speed, pattern and technology needed to obtain a smooth surface.

Dosage

The product is used in concentrated form. Highly absorbent surfaces: 3-4 dl each m2. Less absorbent surfaces: 1-2 dl each layer. (2-3 layers are recommended).

Packaging

306015 – 15L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Naturacoat SC 20 appeared first on Blue and Green.