Interior Coating is a high-tech transparent 1-component graffiti protection for plastic, colored fiberglass and laminate surfaces. The product has excellent chemical resistance properties with high scratch and abrasion resistance.
Interior Coating is a very effective protection which makes it the natural choice to protect e.g. interior surfaces on trains, metro, trams and buses. Marker, spray and ink paint can be easily and repeatedly removed without affecting the surface.

Advantages

• Permanent graffiti protection
• Protective coating with gloss, easy to apply
• Only 1 layer needs to be applied
• Long durability
• Not flammable

Application instructions

• It is important that the underlying surface is completely clean and free of grease and contaminants.
• Clean the surface thoroughly and remove stains and grease.
• Rinse the surface thoroughly with clean water and let the surface dry completely before applying Interior Coating.
• Interior Coating is preferably applied with a microfiber applicator. Apply a layer of approximately 5 μm (micrometers).

NOTE! It is very important to ensure that the material to be coated is not wet or damp. The object temperature must be at least +5 °C when the product is applied. The product is very sensitive to moisture and film formation can be affected by moisture and low temperatures. Application is carried out according to separate product instructions. Coverage: 125-150 m2 / L.
Drying times: Dust dry: approx. 20 minutes (+20 C), Surface dry: approx. 2 hours (+20 C), Final cured approx. 12 hours (+20 C)

Dosage

Used concentrated. ATTENTION! The product must not be exposed to frost.

Packaging

3871053 – 0,5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Interior Coating appeared first on Blue and Green.

DC 6341 is a silane-based sealing agent for concrete.

Advantages

– Effective protection against water and salt damage
– Deep penetration capacity in concrete
– Permeable

Application instructions

Start by cleaning the surface thoroughly to remove dirt and any mould release residue and then allow the surface to dry for 1-5 days depending on the time of year. NB! New concrete must harden for at least 28 days before sealing with DC 6341 is carried out. Shake the product well before use! Apply the sealer using a low-pressure spray gun or roll it on with a roller in a primary layer – then apply a second layer wet on wet to maximise the depth of penetration. The treated surface must have a minimum temperature of approx. 5°C. After approx. 14 days, the anti-graffiti coating can be applied.
Before you begin – Always evaluate the product on each surface to be treated, for suitability and results before overall application. It is important to include previous repairs and repairs in the test area. Different materials / surface compositions can result in absorption and / or appearance differences. Also test the application speed, pattern and technology needed to obtain a smooth surface.
The product cannot be overpainted.

Dosage

The product is used in concentrated form.
Highly absorbent surfaces: 2-3 m2 per litre
Less absorbent surfaces: 4-5 m2 per litre

Packaging

3062025 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Silane DC 6341 40% appeared first on Blue and Green.

DC 6683 is waterbased silane/siloxane solution that is used for the sealing of mineral facade surfaces and concrete.

Advantages

– Effective protection against water damage – Permeable – UV resistant – Extends cleaning interval – Estimated lifetime of approx. 10 years

Application instructions

Start by cleaning the surface thoroughly to remove dirt and then allow the surface to dry. Make sure to cover windows and other surfaces that are not being treated. Shake the product well before use! Apply the sealer using an airless or low-pressure sprayer or roll it on with a roller in a first layer, going slowly from the top down, and then apply a second layer wet-on-wet to maximise the effect of the product. The treated surface must have a minimum temperature of approx. 5°C. After approx. 7 days, the anti-graffiti coating can be applied.
Before you begin – Always evaluate the product on each surface to be treated, for suitability and results before overall application. It is important to include previous repairs and repairs in the test area. Different materials / surface compositions can result in absorption and / or appearance differences. Also test the application speed, pattern and technology needed to obtain a smooth surface.
The product cannot be overpainted.

Dosage

The product is used in concentrated form.
Highly absorbent surfaces: 1 – 3 m2 per litre
Less absorbent surfaces: 4 – 5 m2 per litre

Packaging

302025 – 25L
302700 – 1000L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Silane DC 6683 appeared first on Blue and Green.