Ideal for removing residues from concrete and lime, as well as for removing flight rust and rust. It is also effective for cleaning and neutralizing oxidized surfaces on galvanized material. In the mining sector, it is used as a cleaner for vehicles. Its ability to deep-clean dirt-coated concrete floors, wall surfaces, and sheet facades makes it particularly useful in mining and paper production, without causing damage to aluminum, glass, rubber, painted surfaces, and similar materials.

Application instructions

The product is easily applied with a brush and should be left to act for between 15 and 90 minutes. Afterwards, the surface should be scrubbed with a brush followed by rinsing with a high-pressure washer. As long as the product is wet, it is in an active state and can be effectively used for up to 3 hours. One liter of the product covers an area of approximately 8 to 12 square meters. It is important that the temperature where the product is used exceeds +3°C for optimal results.
Gel Hammer has the ability to break down layers of concrete residue up to 6 mm thick.

Packaging

061025 – 25L
061200 – 200L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Gel Hammer appeared first on Blue and Green.

Bio Cleaner can be used to clean / degrease grime and stubborn stains from most surfaces. Dissolves oil spillages etc. Can be used to clean proteins such as fish, chicken etc.
Can be used on concrete, asphalt, tiles, painted surfaces, artificial materials, rubber, textiles, metal etc. Also works as a stain remover on most types of surfaces.

Advantages

– pH neutral.
– Bio Cleaner contains a special combination of micro-organisms, surfactants and enzymes.
– Good environmental choice.

Application instructions

Apply Bio Clean using a low-pressure sprayer, brush or sponge. Allow to work for 2 to 30 minutes depending on the item to be cleaned. Rinse with water, do not allow the product to dry out.
If necessary, work the object with a brush or sponge. Avoid direct sunlight when cleaning.
Highly effective and economical with low pH and evaporation

Dosage

Ready to use.

Packaging

990001 – 0,5L
990005 – 5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Biocleaner appeared first on Blue and Green.

Cleanon is a low-foaming floor product for polished floors. For
regular cleaning and maintenance of polished floors. An effective
product with great cleaning power, specially developed for cleaning
and maintenance of polished floors and stone flooring. Cleanon can
be used with high speed polishing – excellent polishing qualities.

Advantages

– pH approx. 7.8 in usable solution (1%).
– pH approx. 10 in concentrated form.

Application instructions

Use with all wet-cleaning methods e.g. damp mopping and in floor
washing machines.

The product must not be stored cold.

Dosage

25 to 100 ml per 10 litres water, depending on cleaning frequency
and degree of soiling.
Quick Fix: 1 % per litre water – scrub with machine and red pad.
High speed: 20 % per litre water – With high speed machine.

Packaging

GP-161723 – 5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Cleanon appeared first on Blue and Green.

Polly strengthens surfaces Highly durable Contains polyurethane.
Great alkali resistance. For safe treatment of floors in environments with heavy usage and where floors require a new protective top layer.
1 litre can cover 40 to 70 sq. m. Quick drying.
Can be polished at 1500 rpm. Can be removed with Goaway polish remover.

Advantages

– Polyurethane polish.
– Quick drying.

Application instructions

Ensure that floors are cleaned of old polish, polish residue and dirt etc. Spread Polly in a thin layer evenly distributed across the floor
surface. Allow the floor to dry between each treatment/layer.
The surface is dry enough to walk on after approx. 30 minutes. We recommend at least 2-3 thin layers.
For best results, always follow producer’s instructions for the respective flooring materials.

The product must not be stored cold.

Dosage

Spread in a thin layer. Ready to use.
For extra smooth surfaces: spread undiluted in 2-3 thin even layers.

Packaging

GP-161223 – 5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Polly appeared first on Blue and Green.

Dipex is a highly effective polish remover that easily and safely
dissolves tough deposits with many layers of polish.
Developed for effective removal of polish for floor renovation. Low
pH. No discolouration of flooring. Approved for linoleum floors.

Advantages

– Avoid contact with painted surfaces.
– pH approx. 10 in concentrated form.
– pH approx. 9.9 in 10% usable solution.

Application instructions

Spread the solution across small areas so that it does not dry and
allow to work for 10-15 minutes. Scrub carefully with a scrubbing
machine and coarse disc.
Use a scrubbing block for areas the machine cannot reach. Immediately
remove the solution using a water vacuum cleaner or similar.
For tough, numerous layers of polish, the removal procedure
may be repeated several times until the floor is polish free. Rinse
the floor surfaces immediately – twice with warm clean water. Immediately
remove rinsing water – use a water vacuum cleaner. The
floor should have a neutral pH value, check with a pH strip. Allow
the floor to dry carefully before primer/top and outer treatment is
begun.

Dosage

Normal dosage: 0.5-1 litre for 9 litres cold water.
For especially tough cases and for several layers: 1 litre to 4 litres
cold water. For removal of polyurethane polish: 1 litre to 2 litres
cold water.

Packaging

GP-160923 – 5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Dipex appeared first on Blue and Green.

Goaway is a fast polish remover that effectively and safely dissolves
tough deposits with many layers of polish, all types. For
effective removal of polish for floor renovation. No rinsing needed.
Highly concentrated, low dosage. Low pH. No discolouration of
floors. Can be used on linoleum floors.

Advantages

– Avoid contact with painted surfaces.
– pH approx. 10.4 in concentrated form.
– pH approx. 9.9 in 10% usable solution.

Application instructions

Spread the solution across small areas so that it does not dry.
Fast-working and quick-drying. Allow the solution to work for up to
5 minutes. Machine scour carefully with coarse disc. Use a scrubbing
block for areas the machine cannot reach. Remove the released
polish with a wet vacuum cleaner.
For light polish removal and regularly clean floors, no rinsing is required
–just light damp mopping with clean water is recommended
before applying new polish.

Dosage

1 litre to 19 litres water. For especially tough cases and several
layers of polish: 1 litre to 9 litres water. For removal of polyurethane
polish.
1 litre to 4 litres water. This solution needs to be stirred before
each application to maintain 100% effectiveness. Or dosage as
needed.
– Thickness of polish.

Packaging

GP-160821 – 1L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Goaway appeared first on Blue and Green.

Trouble Solver is used to remove paint, ink, spray painting, friction marks, tire marks, glue residue, tar etc.
Trouble Solver can be used on all hard and soft color-resistant surfaces, such as floors, glass, metals, etc.
Can also be used in printing business.
Trouble Solver should not be used on polykarbonat/Lexan/Makrolon, ABS plastic, silk and leather.

Advantages

• Aromatic free
• pH neutral
• Almost odorless

Application instructions

Trouble Solver is applied with a cloth, mop or a lowpressure
equipment. Allow Trouble Solver to work from 10 seconds to 30
minutes, depending on the nature of the substance, and the surface.
If necessary, process the surface with a brush or sponge.
Dry wipe and always rinse with clean water.
If there is any doubt as to whether the surface can withstand
the product, you should do a test in a less visible place.

Dosage

Use concentrated

Packaging

681005 – 5L
681025 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Trouble Solver appeared first on Blue and Green.

Fast-acting product used to eliminate un-pleasant smells such as urine, smoke, mould, faeces, etc.

Advantages

– Also removes odors from slaughterhouse waste.
– Removes urine stains.
– Gives a strong and fresh odor.

Application instructions

Apply the product directly to the malodourous object. Repeat if necessary.
Shake before use.
Store at room temperature.

Dosage

Ready to use

Packaging

3871050 – 0,5L
394005 – 5L
394025 – 25L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Odour Killer appeared first on Blue and Green.

Effective water-based cleaner for stainless steel, chrome, laminated plastic and aluminum surfaces. Cleans, restores and protects the surface so that it better resists fingerprints and stains.

Advantages

– Effective
– Water based
– Protects surfaces fingerprints and stains

Application instructions

Spray the product directly on a clean cloth.
Wipe the surface until the desired result is obtained.
Let the product dry

Dosage

Ready to use.

Packaging

3871049 – 0,5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Stainless Steel Cleaner appeared first on Blue and Green.

Chewing Gum Remover is used to remove chewing gum residues on hard and soft colorfast surfaces.

Advantages

• pH-neutral
• Can be used on all surfaces without causing damage
• Gives fast results

Application instructions

Spray the product directly on the surface where chewing gum residues are present and leave to work for 1-5 min. Use a plastic scraper to removve the dissolved gum. For heavier chewing gum residue let the product work longer. Finish the work through to clean the surface with a damp cloth or glass cleaner. Check that the material is durable the product. Shake before use.

Dosage

Use concentrated

Packaging

3871048 – 0,5L

The product image should be seen as an illustration. Some deviation from reality may occur.

The post Chewing Gum Remover appeared first on Blue and Green.